data shee t general purpose chip resistors rc0402 5%, 1% rohs compliant & halogen free product specification ? jan 05, 2011 v.6 supersedes date of mar. 06, 2003
chip resistor surface mount w ww.yageo.com j an 05, 2011 v.6 product specification 2 9 series rc 0402 y y a a g g e e o o b b r r a a n n d d o o r r d d e e r r i i n n g g c c o o d d e e global part number ( preferred ) rc0402 x r - xx xxxx l ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 ) ( 1 ) tolerance f = 1% j = 5% (for jumper ordering, use code of j) ( 2 ) packaging type r = paper / pe taping reel ( 3 ) temperature coefficient of resistance ? = base on spec ( 4 ) taping reel 07 = 7 inch dia. reel 7d = 7 inch dia. reel, 2 x standard quantity 10 = 10 inch dia. reel 13 = 13 inch dia. reel ( 5 ) resistance value there are 2~4 digits indicated the resistance value. letter r/k/m is decimal point, no need to mention the last zero after r/k/m, e.g.1k2, not 1k20. detailed resistance rules show in table of ?resistance rule of global part number?. (6) default code letter l is system default code for ordering only (note) ordering information - global part number & 12nc both part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. scope this specification describes rc0402 series chip resistors with lead-free terminations made by thick film process. applications all general purpose application features halogen free epoxy rohs compliant - products with lead free terminations meet rohs requirements - pb-glass contained in electrodes, resistor element and glass are exempted by rohs reducing environmentally hazardous wastes high component and equipment reliability saving of pcb space none forbidden-materials used in products/production o rdering example the ordering code of a rc0402 chip resistor, value 56 x with 1% tolerance, supplied in 7-inch tape of 20,000 units per reel is: rc0402fr-7d56rl. note 1. all our rsmd products meet rohs compliant and halogen free. "lfp" of the internal 2d reel label mentions "lead free process" 2. on customized label, "lfp" or specific symbol can be printed resistance rule of global part number resistance code rule example d1 d1 = dumm y 0r 0r = jumpe r xrxx (1 to 9.76 ? ) 1r = 1 ? 1r5 = 1.5 ? 9r76 = 9.76 ? xxrx (10 to 97.6 ? ) 10r = 10 ? 97r6 = 97.6 ? xxxr (100 to 976 ? ) 100r = 100 ? xkxx (1 to 9.76 k ? ) 1k = 1,000 ? 9k76 = 9760 ? xmxx (1 to 9.76 m ? ) 1m = 1,000,000 ? 9m76= 9,760,000 ?
chip resistor surface mount w ww.yageo.com j an 05, 2011 v.6 product specification 3 9 series rc 0402 p p h h y y c c o o m m p p b b r r a a n n d d o o r r d d e e r r i i n n g g c c o o d d e e s s both global part number (preferred) and 12nc (t raditional) codes are acceptable to order phycomp brand products. global part number ( preferred ) for detailed information of global part number an d ordering example, please refer to page 2. resistance decade (3) last digit 0.01 to 0.0976 x 0 0.1 to 0.976 x 7 1 to 9.76 x 8 10 to 97.6 x 9 100 to 976 x 1 1 to 9.76 k x 2 10 to 97.6 k x 3 100 to 976 k x 4 1 to 9.76 m x 5 10 to 97.6 m x 6 example: 0.02 x = 0200 or 200 0.3 x = 3007 or 307 1 x = 1008 or 108 33 k x = 3303 or 333 10 m x = 1006 or 106 last digit of 12nc (1) the resistors have a 12-digit ordering code starting with 2322. (2) the subsequent 4 or 5 digits indicate the resistor tolerance and packaging. (3) the remaining 4 or 3 digits represent the resistance value with the last digit indicating the multiplier as shown in the table of ?last digit of 12nc?. (4) letter l is system default code for order only (note) o rdering example the ordering code of a rc32 resistor, value 56 x with 1% tolerance, supplied in tape of 10,000 units per reel is: 232270675609l or rc0402fr-0756rl. note 1. all our rsmd products meet rohs compliant and halogen free. "l fp" of the internal 2d reel la bel mentions "lead free process" 2. on customized label, "lfp" or specific symbol can be printed 12nc code 2322 xxx xx xxx l (1) (2) (3) ( 4 ) paper / pe tape on reel (units) (2) type/ 0402 start in (1) tol. (%) resistance range 10,000 20,000/not preferred 50,000 rc31 2322 5% 1 to 22 m ? 705 70xxx --- 705 87xx x rc32 2322 1% 1 to 10 m ? 706 7xxxx --- 706 8xxx x jumper 2322 - 0 ? 705 91001 --- 705 9100 7
chip resistor surface mount w ww.yageo.com j an 05, 2011 v.6 product specification 4 9 series rc 0402 construction the resistor is constructed on top of a high-grade ceramic body. internal metal electrodes are added on each end to make the contacts to the thick film resistive element. the composition of the resistive element is a noble metal imbedded into a glass and covered by a second glass to prevent environment influences. the resistor is laser trimmed to the rated resistance value. the resistor is covered with a protective epoxy coat, finally the two external terminations (matte tin on ni- barrier) are added. see fig.2 marking rc0402 no marking for further marking information, please see special data sheet ?chip resistors marking? fig. 1 ynsc007 dimensions type rc0402 l (mm) 1.00 0.05 w (mm) 0.50 0.05 h (mm) 0.35 0.05 i 1 (mm) 0.20 0.10 i 2 (mm) 0.25 0.10 table 1 overcoat primary glass layer resistive layer (jumper chip is a conductor) inner electrode termination(ni/matte tin) ceramic substrate h i 2 ynsc056 overcoat w l i 1 o o u u t t l l i i n n e e s s for dimension see table 1 fig. 2 chip resistor outlines
chip resistor surface mount w ww.yageo.com j an 05, 2011 v.6 product specification 5 9 series rc 0402 electrical characteristics characteristics rc0402 1/16 w operating temperature range ?55 c to +155 c maximum working voltage 50 v maximum overload voltage 100 v dielectric withstanding voltage 100 v 5% (e24) 1 ? to 22 m ? 1% (e24/e96) 1 ? to 10 m ? resistance range zero ohm jumper < 0.05 ? 1 ? r 10 ? 200 ppm/c 10 ? < r 10 m ? 100 ppm/c temperature coefficient 10 m ? < r 22 m ? 200 ppm/c rated current 1.0 a jumper criteria maximum current 2.0 a footprint and soldering profiles for recommended footprint and soldering profiles, please see the special data sheet ?chip resistors mounting?. table 2 packing style and p a ckaging quantity product type packing style reel dimension quantity per reel rc0402 paper / pe taping reel (r) 7" (178 mm) 10,000/20,000 units 10" (254 mm) 20,000 units 13" (330 mm) 50,000 units note 1. for paper/pe tape and reel specification/dimensions, pl ease see the special data sheet ?chip resistors packing? 2. for size of 0402, standard quantity is 10,000 units per reel table 3 packing style and packaging quantity mlb206_2 70 100 55 50 t amb ( c) o (%p ) rated 0 0 50 100 155 p handbook, halfpage functional description p p o o w w e e r r r r a a t t i i n n g g rc0402 rated power at 70c is 1/16 w r ated voltage the dc or ac (rms) continuous working voltage corresponding to the rated power is determined by the following formula: v= (p x r) or max. working voltage whichever is less where v=continuous rated dc or ac (rms) working voltage (v) p=rated power (w) r=resistance value ( x ) fig. 3 maximum dissipation (p) in percentage of rated power as a function of the operating ambient temperature (t amb )
chip resistor surface mount w ww.yageo.com j an 05, 2011 v.6 product specification 6 9 series rc 0402 tests and requirements test test method procedure requirements at +25/?55 c and +25/+125 c temperature coefficient of resistance (t.c.r.) iec 60115-1 4.8 formula: t.c.r= ------------------------- 1 0 6 (ppm/c) where t 1 =+25 c or specified room temperature t 2 =?55 c or +125 c test temperature r 1 =resistance at reference temperature in ohms r 2 =resistance at test temperature in ohms refer to table 2 life/endurance iec 60115-1 4.25.1 at 705 c for 1,000 hours, rcwv applied for 1.5 hours on, 0.5 hour off, still air required (1.0%+0.05 ? ) for 1% tol. (3.0%+0.05 ? ) for 5% tol. <100 m ? for jumper high temperature exposure/ endurance at upper category temperature iec 60068-2-2 1,000 hours at 1555 c, unpowered (1.0%+0.05 ? ) for 1% tol. (2.0%+0.05 ? ) for 5% tol. <50 m ? for jumper moisture resistance mil-std-202g method-106g each temperature / humidity cycle is defined at 8 hours, 3 cycles / 24 hours for 10d. with 25 c / 65 c 95% r.h, without steps 7a & 7b, unpowered parts mounted on test-boards, without condensation on parts measurement at 242 hours after test conclusion (0.5%+0.05 ? ) for 1% tol. (2.0%+0.05 ? ) for 5% tol. <100 m ? for jumper thermal shock mil-std-202g method-107g -55/+125 c number of cycles required is 300. devices unmounted maximum transfer time is 20 seconds. dwell time is 15 minutes. air ? air (0.5%+0.05 ? ) for 1% tol. (1%+0.05 ? ) for 5% tol. <50 m ? for jumper short time overload iec60115-1 4.13 2.5 times of rated voltage or maximum overload voltage whichever is less for 5 sec at room temperature (1.0%+0.05 ? ) for 1% tol. (2.0%+0.05 ? ) for 5% tol. <50 m ? for jumper no visible damage table 4 test condition, procedure and requirements r 2 ?r 1 r 1 (t 2 ?t 1 )
chip resistor surface mount w ww.yageo.com j an 05, 2011 v.6 product specification 7 9 series rc 0402 test test method procedure requirements board flex/ bending iec 60068-2-21 chips mounted on a 90mm glass epoxy resin pcb (fr4) 5 mm bending bending time: 605 seconds (1.0%+0.05 ? ) for 1%, 5% tol. <50 m ? for jumper no visible damage low temperature operation iec 60068-2-1 the resistor shall be su bjected to a dc rated voltage for 1.5 h-on, 0.5 h-off, at -553 c this constitutes shall be repeated for 96 hours however the applied voltage shall not exceed the maximum operating voltage (0.5%+0.05 ? ) for 1% tol. (1.0%+0.05 ? ) for 5% tol. no visible damage insulation resistance iec 60115-1 4.6 rated continuous overload voltage (rcov) for 1 minute type rc0402 voltage (dc) 100 v 10 g ? dielectric withstand voltage iec 60115-1 4.7 maximum voltage (v rms ) applied for 1 minute type rc0402 voltage (ac) 100 v rms no breakdown or flashover resistance to solvent ipc/jedec j-std-020d lsopropylalcohol (c 3 h 7 oh) followed by brushing no smeared noise iec 60115-1 4.12 maximum voltage (vrms) applied resistors range v alue r < 100 ? 10 db 100 ? r < 1 k ? 20 db 1 k ? r < 10 k ? 30 db 10 k ? r < 100 k ? 40 db 100 k ? r < 1 m ? 46 db 1 m ? r 22 m ? 48 db humidity iec 60115-1 4.21 steady state for 1000 hours at 40 c / 95% r.h. rcwv applied for 1.5 hours on and 0.5 hour off (1.0%+0.05 ? ) for 1% tol. (2.0%+0.05 ? ) for 5% tol. <100 m ? for jumper
chip resistor surface mount w ww.yageo.com j an 05, 2011 v.6 product specification 8 9 series rc 0402 test test method procedure requirements intermittent overload iec 60115-1 4.39 2.5 times of rated voltage or maximum overload voltage whichever is less for 1 second on and 25 seconds off; total 10,000 cycles (1.0%+0.05 ? ) for 1% tol. (2.0%+0.05 ? ) for 5% tol. <100 m ? for jumper solderability - wetting ipc/jedec j-std-002b test b electrical test not required magnification 50x smd conditions: 1 st step: method b, aging 4 hours at 155 c dry heat 2 nd step: lead-free solder bath at 2453 c dipping time: 30.5 seconds well tinned ( 95% covered) no visible damage - leaching ipc/jedec j-std-002b test d lead-free solder, 260 c, 30 seconds immersion time no visible damage - resistance to soldering heat iec 60068-2-58 condition b, no pre-heat of samples lead-free solder, 260 c, 10 seconds immersion time procedure 2 for smd: devices fluxed and cleaned with isopropanol (0.5%+0.05 ? ) for 1% tol. (1.0%+0.05 ? ) for 5% tol. <50 m ? for jumper no visible damage
chip resistor surface mount w ww.yageo.com j an 05, 2011 v.6 product specification 9 9 series rc 0402 ? yageo reserves all the rights for revising the content of this datasheet without furt her notification, as long as the product s itself are unchanged. any product change will be announced by pcn.? revision history revision date change notification description version 6 jan 05, 2011 - - typo updated version 5 apr 27, 2010 - - updated test items and methods - add new taping reel code of 7 inch dia. reel with double standard quantity (20,000 units per reel) version 4 jul 21, 2009 - - test items and methods updated - test requirements upgraded version 3 jul 15, 2008 - - change to dual brand datasheet that describe rc0402 with rohs compliant - description of "halogen free epoxy" added - define global part number version 2 sep 03, 2004 - - new datasheet for 0402 thick film 1% and 5% with lead-free terminations - replace the 0402 part of pdf files: rc01_11_21_31_5, rc02_12_22_32_10 - test method and procedure updated - pe tape added (paper tape will be replaced by pe tape)
|
